Flush-Bonded Windows; Removal And Installation - Audi TT 207 Repair Manual

Table of Contents

Advertisement

Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2

Removal and Installation

⇒ "2.1 Flush-Bonded Windows", page 196
⇒ "2.2 Bolted Windows", page 212
2.1

Flush-Bonded Windows

⇒ "2.1.1 Flush-Bonded Windows", page 196
⇒ "2.1.2 Windshield", page 197
⇒ "2.1.3 A-Pillar Seal", page 203
⇒ "2.1.4 Side Window", page 204
⇒ "2.1.5 Rear Window", page 207
2.1.1
Flush-Bonded Windows
Special tools and workshop equipment required
♦ Removal Kit for Flush-Bonded Windows -V.A.G 1474 A- or -
V.A.G 1474 B-
♦ Suction lifter -V.A.G 1344-
♦ Cutting tools for glass -V.A.G 1351-
♦ Window removing kit -V.A.G 1755-
♦ Cartridge gun -V.A.G 1628-
♦ Cartridge heater -V.A.G 1939 A-
♦ Window cutter -V.A.G 1561 A-
♦ Cutting blade (58 mm) -V.A.G 1561/2-
♦ Cutting blade (U-shaped) -V.A.G 1561/3-
♦ Scraper (25 mm) -V.A.G 1561/8-
♦ Cutting blade, bent at right angle -V.A.G 1561/10-
♦ Double cartridge gun -VAS 5237-
♦ Spooling tool -V.A.G 1654 A-
♦ Window Repair Kit -VAS 6092-
Servicing windows with Window Repair Kit -VAS 6092-
♦ Windshields with stone damage can be repaired with the Win‐
dow Repair Kit -VAS 6092- .
♦ These damaged areas must not exceed a certain dimension
or lie within the driver's field of sight.
♦ For further details on use, refer to operating instructions en‐
closed with each kit.
Materials
♦ 2K-Window Adhesive Kit -DA 004 600 A2- , refer to
♦ 1K-window adhesive -DH 009 100 03- , refer to
♦ Glass and paint primer -D 009 200 02-
♦ Cleaning solution -D 009 401 04-
♦ Applicator -D 009 500 25-
♦ Adhesive remover -D 002 000 10-
196
Rep. Gr.64 - Glass, Window Regulators
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1) 2)
3) 4)

Advertisement

Table of Contents
loading

Table of Contents