Table of Contents
Advertisement
1 - Door
2 - Inner window shaft strip
❑ The door trim panel is
removed.
❑ Door window removed.
–
To installed, slide into
guide rail on »A-pillar«.
–
Attach shaft strip to »A-
pillar« -arrow-.
–
Then clip into door at
»B-pillar«.
–
Press shaft strip onto
door flange from above.
3 - Door window
4 - »A-pillar« trim
Body Exterior - Edition 11.2010
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
2. Removal and Installation
95
Advertisement
Table of Contents
