Table of Contents
Advertisement
1 - Screws
❑ 1.5 Nm
2 - Rear Bumper
–
To remove, remove
bolts -1- on wheel hous‐
ing liner, bolts -3- under
cover strip
⇒ Item 17 (page 159)
and bolts -5- from brack‐
et -6-.
–
First disengage bumper
from outer guide piece,
then remove toward
rear from inner guide
piece.
3 - Bolt
❑ Cover strip, removing
⇒ page 178
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
❑ 2.5 Nm
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
4 - Inner guide piece
5 - Bolt
❑ 2.5 Nm
6 - Bracket
7 - Wheel housing liner
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
175
Advertisement
Table of Contents
