Table of Contents
Advertisement
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
50 –
Body Front
1
Removal and Installation
⇒ "1.1 Front Fenders", page 2
⇒ "1.2 Engine Mount Brace", page 3
⇒ "1.3 Lock Carrier with Attachments", page 4
⇒ "1.4 Plenum Chamber Cover", page 5
⇒ "1.5 Engine Mount Brace Reinforcement", page 6
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
⇒ "1.6 Bumper Bracket", page 7
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ "1.7 Noise Insulation Frame", page 8
⇒ "1.8 Fender Brace", page 8
⇒ "1.9 Fender End Plate", page 9
1.1
Front Fenders
1 - Bolt
❑ 11 Nm
2 - Bracket
3 - Fender
❑ Removing
❑ Loosen sill panel cover
in fender area.
❑ Headlamp removed, re‐
fer to ⇒ Electrical Equip‐
ment; Rep. Gr. 94 ;
Removal and Installa‐
tion
–
Remove the front bump‐
er:
❑ Audi TT:
⇒ "2.1.2 Front Bumper",
page 165
,
❑ Audi TT RS:
⇒ "2.2.1 Front Bumper",
page 170
–
Remove wheel housing
liner. Refer to
⇒ "3.8.1 Front Wheel
Housing Liner",
page 255
.
–
End plate, removing, re‐
fer to
⇒ page 9
–
Remove bolts and re‐
move fender.
❑ Installation: in reverse
order.
4 - Brace
2
Rep. Gr.50 - Body Front
Advertisement
Table of Contents
