Table of Contents
Advertisement
Hood Projection
– For correct adjustment, lid -1- must project in the headlamp
area -2-.
•
Dimension -a-= 3.5 mm +/- 0.5 mm
•
Projection dimension -b- = 3 mm +/- 0.5 mm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.1.2
Hood Hinge, Adjusting
♦ When changing the hinge, ensure that -a- = 12.5 mm and ad‐
just if necessary.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation
11
Advertisement
Table of Contents
