Hood Gap Dimensions - Audi TT 207 Repair Manual

12 - Gas strut
❑ Removing and Installing, refer to
13 - Ball head pin
❑ 23 Nm
14 - Nut
❑ 34 Nm
1.2.2

Hood Gap Dimensions

Hood Gap Dimensions with Respect To Radiator Grille, Bumper,
Headlamp
A - Hood to bumper
• Gap dimension-a- = 4.5 +/-
0.5 mm
-1- hood
-2- bumper
❑ Adjusting, refer to
⇒ "1.2.3 Hood, Adjust‐
ing", page 14
B - Hood to radiator grille side
• Gap dimension -b- from top
to bottom = 4.0 to 2.5 +/- 0.5
mm
-1- hood
-3- Radiator grille
❑ Adjusting, refer to
⇒ "1.2.3 Hood, Adjust‐
ing", page 14
C - Hood to radiator grille
• Gap dimension -c- = 4.4 +/-
0.5 mm
• Projection -d- = 1.5 +/- 0.5
mm
-1- hood
-3- Radiator grille
❑ Adjusting, refer to
⇒ "1.2.3 Hood, Adjust‐
ing", page 14
D - Hood to headlamp
• Gap dimension -e- from top to bottom = 3.0 to 1.6 +/- 0.5 mm
• Projection -f- = 3.0 +/- 0.5 mm
Gap Dimensions of Hood to Fender, Front Door
⇒ "2.2.6 Gas-Filled Strut", page 40
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation
13