Examples
Turn on the dynamic bass.
SETDYNAMICBASS 1
Result:
#*set dynamic bass state to 1
SETDYNAMICCONTRAST
Set dynamic contrast.
Commands
Command
SETDYNAMICCONTRAST
Examples
#*Dynamic contrast set to n
or
#*Missing dynamic contrast state
SETEQMODE
Set the equalizer mode.
Commands
Command
SETEQMODE
<mode>
Examples
Set the equalizer mode to Movie.
SETEQMODE Movie
Result:
#*setEQMode() set to Movie
SETEQUSERFREQ
Set the equalizer setting for any band.
Commands
Command
SETEQUSERFREQ
<band> <equalizer setting>
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set dynamic contrast.
Description
Set the equalizer mode.
Description
Sets the equalizer setting for one of the
following bands:
• 120Hz
• 500Hz
• 1.5KHz
• 5KHz
• 10KHz
RS232 commands
Values
str-int n (n = OFF, n = LOW, n = MEDIUM, n =
HIGH)
Values
• Music
• Movie
• Speech
• Flat
• Classic
• User
Values
-12 to 12
80