Setwb; Setwifiapchannel; Setwifiaptxpower - Christie Access II Series Technical Reference

Examples
setVirtual3D() set to n
or
Incorrect virtual 3d mode paramater entered

SETWB

Set white balance value.
Commands
Command
SETWB
Examples
#*White Balance is set to value
or
Invalid value for White Balance (0-255)
or
Invalid type for White Balance

SETWIFIAPCHANNEL

sets the channel of the wifi access point
Commands
Command
SETWIFIAPCHANNEL
Examples
#*Setting Wifi AP Channel (<channel>) succeeded
or
#*Wifi AP Channel is already (<channel>)
or
#*Error! Invalid channel. Available channels for your country (<country name>) are: <all available channels separated with space>

SETWIFIAPTXPOWER

sets TX Power for wifi access point.
Commands
Command
SETWIFIAPTXPOWER
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set white balance value.
Description
sets the channel of the wifi access point
Description
sets TX Power for wifi access point.
RS232 commands
Values
str-int type, value (type = redgain, greengain,
bluegain, redoffset, greenoffset, blueoffset) (0
≤ value ≤250)
Values
n (integer channel) - (Channel number should
be valid for current country. If invalid channel
number is given all valid channel numbers will
be listed.)
Values
n (integer tx power in dBm) - should be in the
range of 0 - 20 dbm (0 for default value)
101