SCURL
Set Channel List URL
Commands
Command
SCURL
Examples
#Channel List Url setup SUCCESSED
SDFTI
Set Default First Time Installation by reseting the parameters set by SFTI and returning to default FTI settings; then reboots the system.
Commands
Command
SDFTI
Examples
#System will be reinitialised !!!
SEA
Send emergency alarm
Commands
Command
SEA
Examples
#Emergency Alarm is set !!!
SET2DONLY
Set 2D values.
Commands
Command
SET2DONLY
Examples
set2DOnly() set to n
or
Incorrect 2d only mode paramater entered
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set Channel List URL
Description
Set Default First Time Installation by reseting
the parameters set by SFTI and returning to
default FTI settings; then reboots the system.
Description
Send emergency alarm
Description
Set 2D values.
RS232 commands
Values
string -int (new url of channel list)
Values
–
Values
string-string (alarm url - emergency message)
[message content should be "word1+
word2+word3 ..."]
Values
int n (0 = off, 1 = left, 2 = right)
70