Setdns1; Setdns2; Setdnsconfiguration; Setdynamicbass - Christie Access II Series Technical Reference

SETDNS1

set DNS server 1 (DNS server value should be of format nnn.nnn.nnn.nnn) (eg. SETDNS1 nnn.nnn.nnn.nnn)
Commands
Command
SETDNS1
Examples
#*set DNS server 1 to: nnn.nnn.nnn.nnn
or
#*setting DNS server 1 failed

SETDNS2

set DNS server 2 (DNS server value should be of format nnn.nnn.nnn.nnn) (eg. SETDNS2 nnn.nnn.nnn.nnn)
Commands
Command
SETDNS2
Examples
#*set DNS server 2 to: nnn.nnn.nnn.nnn
or
#*setting DNS server 2 failed

SETDNSCONFIGURATION

set DNS configuration mode (auto,manual) (eg. SETDNSCONFIGURATION mode (auto,manual))
Commands
Command
SETDNSCONFIGURATION
Examples
#*set DNS configuration to: <dns-conf-mode>
or
#*setting DNS configuration is failed

SETDYNAMICBASS

Turns mute on and off.
Commands
Command
SETDYNAMICBASS
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
set DNS server 1 (DNS server value should
be of format nnn.nnn.nnn.nnn) (eg. SETDNS1
nnn.nnn.nnn.nnn)
Description
set DNS server 2 (DNS server value should
be of format nnn.nnn.nnn.nnn) (eg. SETDNS2
nnn.nnn.nnn.nnn)
Description
set DNS configuration mode (auto,manual)
(eg. SETDNSCONFIGURATION mode
(auto,manual))
Description
Turns the dynamic base on or off.
RS232 commands
Values
string "nnn.nnn.nnn.nnn"
Values
string "nnn.nnn.nnn.nnn"
Values
string n ('auto' or 'manual')
Values
• 0 = Off
• 1 = On
79