Setdapavl; Setdefaultgateway; Setdigitalout - Christie Access II Series Technical Reference

Examples
#*Customer name is set as TOSHIBA (ie. TOSHIBA)

SETDAPAVL

Set DAP (Dolby Audio Processing) AVL state.
Commands
Command
SETDAPAVL
Examples
#*DAP AVL is not changed due to DAP (Dolby Audio Processing Availability) is inactive
or
#*DAP AVL is not changed due to DAP (Dolby Audio Processing Availability) Mode is off
or
#*Set DAP (Dolby Audio Processing) state to n
or
Invalid parameter (0-1-2-3)

SETDEFAULTGATEWAY

Set the default gateway.
Commands
Command
SETDEFAULTGATEWAY
Examples
Set the default gateway to 10.1.1.3.
SETDEFAULTGATEWAY 10.1.1.3
Result:
#*set default gateway: 10.1.1.3

SETDIGITALOUT

Set digital out to compressed or PCM.
Commands
Command
SETDIGITALOUT
<mode>
Examples
Set digital out to PCM
SETDIGITALOUT pcm
Result:
#*setDigitalOut() set to pcm
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set DAP (Dolby Audio Processing) AVL state.
Description
Set the default gateway for the network
connection, formatted as xxx.xxx.xxx.xxx.
Description
Set digital out.
RS232 commands
Values
integer n (0 = off, 1 = normal, 2 = night, 3 =
auto)
Values
–
Values
• compressed
• pcm
78