Autopos; Autosetsignageid; Autotvoff; Backlightdim - Christie Access II Series Technical Reference

AUTOPOS

Automatically position the image on the display panel.
Commands
Command
AUTOPOS
Examples
Automatically position the image on the display panel.
AUTOPOS
Result:
#*set auto position

AUTOSETSIGNAGEID

Sets signage id automatically. For usage the feature the AdvancedVideoWall profile item should be enable.
Commands
Command
AUTOSETSIGNAGEID
Examples
#*
OR
#*AdvancedVideoWall profile item is disabled.

AUTOTVOFF

Set auto panel off level
.
Commands
Command
AUTOTVOFF
Examples
#*set auto Display off mode to ON
or
#*set auto Display off mode to OFF

BACKLIGHTDIM

Set backlight dimming level. (if enabled from profile)
Commands
Command
BACKLIGHTDIM
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Automatically positions the image on the
display panel.
Description
Sets signage id automatically. For usage the
feature the AdvancedVideoWall profile item
should be enable.
Description
Set auto panel off level.
Description
Set backlight dimming level. (if enabled from
profile)
RS232 commands
Values
–
Values
–
Values
integer n (0 = off, 1 = on)
Values
str-int n (n = low, high, off)
12