Christie UHD862-L User Manual

Christie UHD862-L User Manual

Lcd panels
Table of Contents

Advertisement

Quick Links

User Guide
020-001836-01
Access II Series LCD Panels

Advertisement

Table of Contents
loading

Summary of Contents for Christie UHD862-L

  • Page 1 User Guide 020-001836-01 Access II Series LCD Panels...
  • Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
  • Page 3: Table Of Contents

    Upgrading the firmware from USB ..................21 Disabling the remote control ....................22 Using the Crestron RoomView Control tool ................22 Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 4 Safety ........................... 40 RF exposure ........................40 Electro-magnetic compatibility ..................40 Environmental ........................ 41 Certification Note for Canada .................... 42 Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 5: Package Handling

    5. Remove any additional packaging, such as protective stickers, from the display panel. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 6: Cleaning The Panel

    Washing with various cleaning agents, brighteners, abrasives, waxes, benzene, alcohol, solvent, surface active agent, may damage the surface of the product. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 7: Important Safeguards

    TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be tripped over, or damaged by persons walking on or objects rolling over the cables. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 8: Avoiding Image Retention

    Installing the IR extender cable (on page 16) Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
  • Page 9: Related Documentation

    UHD752-L Service Guide (P/N: 020-001846-xx)  UHD862-L Service Guide (P/N: 020-001847-01)  Access / Secure Series LCD Panel External Controls (P/N: 020-001853-xx) Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 10: Installing A Display Panel

    5. To change the volume, press the control joystick left and right. To increase the volume, move the joystick right. To decrease the volume, move the joystick left. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 11 Installing a display panel Display components Learn about the various parts of the display panel. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 12 The HDMI output port functions when a USB (2.0) source device is connected to the HDMI USB (2.0) input. HDMI2 In OPS Ready HDMI3 In Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 13: Remote Control

    If you will not use the remote control for a long time, consider removing the batteries to avoid damage from battery leakage. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 14 Back—Returns to previous screen. menus and settings. Not supported Exit—Exits the displayed menu, or returns to the previous screen. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 15: Installing The Optional Wi-Fi Dongle

    USB cable, and move the Wi-Fi dongle away from the metal back-plate of the display panel. The Wi-Fi dongle can be plugged into any of the USB ports on the display panel. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 16: Installing The Ir Extender Cable

    AC power input is on the bottom edge of the display panel and that the ports and OPS slot are on the top edge of the display panel. It may be necessary to move the Christie name plate to the bottom edge of the display panel.
  • Page 17: Installing A Display Panel On An Indented Wall

    5. Press OK. 6. Configure the display panel to connect to a wired or wireless network. 7. Press OK. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 18: Connecting Sources To The Panel

    4. On the remote control, press Source. 5. In the Sources list, select the HDMI input of the connected CEC device. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 19: Selecting The Audio Destination

    Content stored on a mobile device connected to the wireless network can be accessed and displayed on the display panel through the Media Browser. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 20: Enabling Wake On Lan

    Installing a display panel The display panel supports 802.11 a,b,g and n type modems. Christie recommends using the IEEE 802.11n communication protocol. The display panel cannot connect to networks with a hidden wireless network name (SSID). If the modem shares the same SSID as another modem in the area, change the SSID of the modem. Use a wired connection if you experience problems with a wireless connection.
  • Page 21: Rotating The On-Screen Display

    2. Select Signage Settings > Controls > OSD Orientation and select the appropriate orientation. 3. To exit the menu, on the remote, press Menu again. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 22: Copying Settings From One Display Panel To Another

    Install the new firmware to upgrade the display panels. 1. Download the latest software from www.christiedigital.com and unzip the file. 2. Navigate to access_7.xx.x.x_mb130.bin Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 23: Disabling The Remote Control

    Crestron RoomView functions are set according to the models and specifications of the product. For further information, visit http://www.crestron.com and http://www.crestron.com/getroomview. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 24: Playing Content On The Display Panels

    Playing media over the network Play content available on the same network as the display panel. For higher playback quality, Christie recommends using a wired connection when connecting the display panel to other devices. Third party software such as Nero MediaHome may be required to share content over the network.
  • Page 25: Playing Media From Usb

    USB device is played. 1. On the display panel remote, press Media Browser. 2. Select Settings. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 26: Displaying An Image When No Signal Is Detected

    If the No Signal image is not available, the message "No Signal OSD" is displayed on the screen, and the display panel turns off after five minutes. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 27 Available depending on the Picture Zoom setting. Highlight and press OK , then use Picture Shift directional buttons to shift the picture upwards or downwards. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 28 HDMI Full Range to enhance blackness in the picture. Reset Resets the picture settings to factory default settings (except Game mode). Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 29: Display Panel Menu Contents

    Surround Sound Enables or disables surround sound. Digital Out Sets the digital out audio type to PCM or Compressed. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 30 Enable or disable this feature by setting it as On or Off. Note: For detailed information on the options of this menu refer to the Connectivity section. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 31 If the No Signal option is set as Input Search, this option is not be available. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 32 Note: This feature applies for HDMI1 and HDMI2 input sockets only. Refer to the General View section to see the HDMI inputs. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 33 Format Disk option in this menu (FAT32 format only). USB Operations Highlight and press OK to perform USB operations Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 34 1 in this template, then the Cell option should be set as 1 for this display. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 35 Press the Green button to save settings when complete. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 36 Enter the correct PIN to carry out this operation. Note: Enter the PIN you have defined during the First Time Installation process. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 37 Sets your Display to start playing the media content installed on a USB Auto Play removable device automatically. Refer to USB Auto Play Feature section for detailed information. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 38: Troubleshooting

    If the router does not have a problem, check the internet connection of your modem. Related information Connecting to a wired network (on page 19) Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 39: Disruption During Playback Or Slow Reactions

    MAC address, the internet service provider cannot validate the MAC address of the display panel. For this reason, the display panel cannot connect to the internet. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 40: Invalid Domain

    Navigate to System > Picture Menu > Advanced Settings and turn off Movie Sense. These settings may introduce judder into the image. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 41: Specifications

    400 x 200 9,5x21mm UHD652-L 400 x 400 7x21mm UHD752-L 600 x 400 15mm UHD862-L 600 x 400 15mm Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 42: Power Specifications

    100-240V AC 50-60Hz 1.4A UHD652-L 100-240V AC 50-60Hz 1.8A UHD752-L 100-240V AC 50-60Hz 3.1A UHD862-L 100-240V AC 50-60Hz 3.8A Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 43: Environmental Specifications

    0 °C to 40 °C (32 °F - 104 °F) UHD752-L 0 °C to 40 °C (32 °F - 104 °F) (No condensation) UHD862-L Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 44: Regulatory

    (EMC) requirements. Modification statement Christie Digital Systems has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Christie Digital Systems n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature.Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil...
  • Page 45: Environmental

    Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendment(s). Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 46: Certification Note For Canada

    1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioèlectrique subi, mème si le brouillage est susceptible d’en compromettre le fonctionnement. Access II Series LCD Panel User Guide 020-001836-01 Rev.1 (09-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 47 Corporate offices Worldwide offices Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: 714 236 8610...

This manual is also suitable for:

Access ii seriesUhd752-lUhd652-lUhd552-l

Table of Contents