Volumedown; Volumeup; Vpos - Christie Access II Series Technical Reference

VOLUMEDOWN

Turn down the volume.
Commands
Command
VOLUMEDOWN
Examples
Turn down the volume.
VOLUMEDOWN
Result:
#*volume LEVEL is decreased to <level>

VOLUMEUP

Turn up the volume.
Commands
Command
VOLUMEUP
Examples
Turn up the volume.
VOLUMEUP
Result:
#*volume LEVEL is increased to <level>

VPOS

Set the vertical position.
Commands
Command
VPOS <value>
Examples
Set the vertical position to -10.
VPOS -10
Result:
#*set horizontal position to -10
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Decreases the volume by one, until the
minimum volume is reached.
Description
Increases the volume by one, until the
maximum volume is reached.
Description
Sets the vertical position of the image on the
display panel.
RS232 commands
Values
–
Values
–
Values
-25 to 25
114