Gettemperature; Gettimemode; Gettotalspace - Christie Access II Series Technical Reference

Examples
#*Current System Temperature:...
or
#*Temperature Settings are not available!!!

GETTEMPERATURE

Measure ambient temperature using temperature sensor
Commands
Command
GETTEMPERATURE
Examples
#*TEM=...
OR
#*Temperature sensor is not available

GETTIMEMODE

Get time mode
Commands
Command
GETTIMEMODE
Examples
#*time mode is n
or
#*can not get time mode
Note: Above n is "auto" or "manual".

GETTOTALSPACE

Display the total amount of space on the connected USB device.
Commands
Command
GETTOTALSPACE
Examples
Display the amount of space on the connected USB device.
GETTOTALSPACE
Result:
#*The total space is 4096 MB
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Measure ambient temperature using temperature
sensor
Description
Get time mode
Description
Displays the amount of space on the
connected USB device, in mb.
RS232 commands
Values
–
Values
–
Values
–
53