Tof; Ton; Tsu - Christie Access II Series Technical Reference

TN
Send Message/Trigger notification
Commands
Command
TN
Examples
#Message Sent in SUCCESS !!!

TOF

Turn Off Panel
Commands
Command
TOF
Examples
#Display will be sent to Active Standby state.

TON

This command will turn on the panel, if panel is in active standby state and the parameter value will set volume value, if the Startup Volume
Enable item (in Volume Settings menu) value is enable.
TON must be called with a parameter for volume level. Otherwise, it gives "Missing parameter" error.
Commands
Command
TON
Examples
#Display will be turned on

TSU

trigger sw update
Commands
Command
TSU
Examples
#*Web Software Update search triggered !!!
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Send Message/Trigger notification
Description
Turn Off Panel
Description
This command will turn on the panel, if panel is in
active standby state and the parameter value will
set volume value, if the Startup Volume Enable
item (in Volume Settings menu) value is enable.
TON must be called with a parameter for volume
level. Otherwise, it gives "Missing parameter"
error.
Description
trigger sw update
RS232 commands
Values
int (key id (900<= id<=904))
Values
–
Values
integer (volume value)
Values
–
109