Setminvolume; Setmode_Embeddedtouch; Setmodelno; Setmode_Mic - Christie Access II Series Technical Reference

Examples
#*The subtitle position is set to ... (up, down)

SETMINVOLUME

Set volume minimum level
Commands
Command
SETMINVOLUME
Examples
#*ACK
or
#*NACK
Note: input must be less than maximum volume

SETMODE_EMBEDDEDTOUCH

Set the embedded touch mode
Commands
Command
SETMODE_EMBEDDEDTOUCH
Examples
#*Embedded touch mode is set to *****
or
#*Embedded touch mode is not set (invalid input)

SETMODELNO

Set model no.
Commands
Command
SETMODELNO
Examples
#*ACK
or
#*NACK

SETMODE_MIC

Set the DSP(Mic) and Front USB status value
Commands
Command
SETMODE_MIC
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set volume minimum level
Description
Set the embedded touch mode
Description
Set model no.
Description
Set the DSP(Mic) and Front USB status value
RS232 commands
Values
integer n (0 ≤ n ≤ 100)
Values
string (external, display, android, ops) (slot))
Values
string-integer n
Values
string (auto, display, android, ops)
85