Getmode_Wifibt; Getmute; Getnetworktype; Getnoisereduction - Christie Access II Series Technical Reference

GETMODE_WIFIBT

Get the wifi&bt switch value
Commands
Command
GETMODE_WIFIBT
Examples
#*Wifi & BT Switch Mode is *****
or
#*Wifi & BT Switch Mode is (invalid input)

GETMUTE

Displays the current mute setting.
Commands
Command
GETMUTE
Examples
Display the status of mute.
GETMUTE
Result:
#*MUTE OFF
or
#*MUTE ON

GETNETWORKTYPE

Display the network type setting.
Commands
Command
GETNETWORKTYPE
Examples
Display the network type setting.
GETNETWORKTYPE
Result:
#*the network type is wired

GETNOISEREDUCTION

Get noise reduction.
Commands
Command
GETNOISEREDUCTION
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Get the wifi&bt switch value
Description
Retrieves the status of mute.
Description
Display the network type setting.
Description
Get noise reduction.
RS232 commands
Values
–
Values
–
Values
–
Values
–
41