SRC
Set Remote Control Code
Commands
Command
SRC
Examples
#Remote Control system Code set to ...
SSI
Signal strength indicator.
Commands
Command
SSI
Examples
#*getSignalStrength():signal strength=% ...
SSIP
Set static IP, Default Gateway and SubnetMask addresses (seperate addresses with "-" character)
Commands
Command
SSIP
Examples
#IP address setting Succesfull
STANDBY
Set the display panel to Standby mode.
Commands
Command
STANDBY
Examples
Put the display panel into standby mode.
STANDBY
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set Remote Control Code
Description
Signal strength indicator.
Description
Set static IP, Default Gateway and SubnetMask
addresses (seperate addresses with "-"
character)
Description
Switches the display panel to Standby. To
wake the panel from standby, run the Wakeup
command.
RS232 commands
Values
int (2/3/4)
Values
–
Values
string ( ex: 192.168.0.15-10.0.90.5-
255.255.255.0)
Values
–
105