Table of Contents
Advertisement
GETSLIDESHOWINTERVAL
Display the current slide show interval setting.
Commands
Command
GETSLIDESHOWINTERVAL
Examples
Display the current slide show interval setting.
GETSLIDESHOWINTERVAL
Result:
#*The slideshow interval is 30 seconds
GETSOURCE
Display the currently enabled source.
Commands
Command
GETSOURCE
Examples
Display the current source.
GETSOURCE
Result:
#*source is VGA
GETSTANDBY
Display the current standby status.
Commands
Command
GETSTANDBY
Examples
Display the current standby status.
GETSTANDBY
Result:
#*standby on
or
#*standby off
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Displays the current slide show interval setting. –
Description
Displays the current source.
Description
Displays the current standby status.
RS232 commands
Values
Values
–
Values
–
50
Advertisement
Table of Contents
