Edhcpc; Energysaving; Enteractivestandby; Exitactivestandby - Christie Access II Series Technical Reference

EDHCPC

Enable Dhcp client
Commands
Command
EDHCPC
Examples
#DHCPC_ENABLED in SUCCESS !!!

ENERGYSAVING

Set energy saving mode. (if enabled from profile)
Commands
Command
ENERGYSAVING
Examples
#*setEnergySaving() set to n

ENTERACTIVESTANDBY

Enter active standby state
Commands
Command
ENTERACTIVESTANDBY
Examples
#*Display will be sent to Active Standby state!
or
#*Display is in Active Standby state already!

EXITACTIVESTANDBY

Exit active standby state
Commands
Command
EXITACTIVESTANDBY
Examples
#* Display is not in Active Standby state!
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Enable Dhcp client
Description
Set energy saving mode. (if enabled from
profile)
Description
Enter active standby state
Description
Exit active standby state
RS232 commands
Values
–
Values
str-int n (n = off, minimum, medium, maximum,
auto, screen_off)
Values
–
Values
–
22