Christie Access II Series Technical Reference page 2

Lcd panels external commands
Hide thumbs Also See for Access II Series:
Table of Contents

Advertisement

NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected
in this document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical,
but may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance
specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including,
but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or
consequential damages in connection with the performance or use of this material. Manufacturing facilities in Canada and China are ISO 9001
certified. Manufacturing facilities in Canada are also ISO 14001 certified.
WARRANTY
Products are warranted under Christie's standard limited warranty, the complete details of which are available by contacting your Christie dealer or
Christie. In addition to the other limitations that may be specified in Christie's standard limited warranty and, to the extent relevant or applicable to
your product, the warranty does not cover:
a) Problems or damage occurring during shipment, in either direction.
b) Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players,
etc., or use of a product with any non-Christie interface device.
c) Problems or damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake, or other natural disaster.
d) Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or a
Christie authorized repair service provider.
e) Use of third party product enclosures for environmental protection during outside use must be approved by Christie.
f) Problems or damage caused by use of a product on a motion plator other movable device where such product has not been designed, modified
or approved by Christie for such use.
g) Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is
protected from precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended
ambient temperature set forth in the specifications for such product.
h) Image retention on LCD flat panels.
i) Defects caused by normal wear and tear or otherwise due to normal aging of a product.
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any
product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the
end user is located or (ii) the required international warranty fee has been paid.
The warranty does not obligate Christie to provide any on site warranty service at the product site location.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to permaintenance as required, and
in accordance with the maintenance schedule specified by Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at the user's own expense.
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을
목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol
that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product
appropriately and according to local regulations. In the European Union, there are separate collection systems for used electrical and electronic
products. Please help us to conserve the environment we live in!
means

Advertisement

Table of Contents
loading

Table of Contents