Getinternetspeed; Get_Ip_Address; Getlanguage; Getled - Christie Access II Series Technical Reference

Commands
Command
GETHUMIDITY
Examples
#*HUM=...
OR
#*Humidity sensor is not available

GETINTERNETSPEED

get internet speed
Commands
Command
GETINTERNETSPEED
Examples
#*The internet speed is ... Mbps

get_IP_address

Display the IP address of the eth0 network interface.
Commands
Command
get_IP_address
Examples
Display the IP address of the eth0 network interface.
get_IP_address

GETLANGUAGE

Shows the language.
Commands
Command
GETLANGUAGE
Examples
#*Language: X(string)

GETLED

Display the current status of the LED.
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Measure relative humidity using humidity sensor –
Description
get internet speed
Description
Displays the IP address of the eth0 network
interface.
Description
Shows the language.
RS232 commands
Values
Values
–
Values
–
Values
–
37