Wakeup; Wau; Wifi - Christie Access II Series Technical Reference

WAKEUP

Wake the display panel from standby.
This command requires that the terminal program be set to baud rate 38400.
Commands
Command
WAKEUP
Examples
Wake the display panel.
WAKEUP
Related information
STANDBY (on page 105)

WAU

SW Auto Upgrade
Commands
Command
WAU
Examples
#Auto Software Update Availability - ENABLED !!

Wifi

checks if given SSID wifi is found or not and returns Pass or Fail. Works only in portal mode
Commands
Command
Wifi
Examples
#*Pass
or
#*FAIL
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Wakes the display panel.
Description
SW Auto Upgrade
Description
checks if given SSID wifi is found or not and
returns Pass or Fail. Works only in portal mode
RS232 commands
Values
–
Values
int ( 1-enabled/ 2- disabled)
Values
str-int ssid
115