Examples
Set the headphone out put to lineout.
SETHEADPHONEOUTPUT lineout
Result:
#*set headphone output to lineout
SETHOSTNAME
Creates the file (if does not exist) "/conf/ip_tuner/hostname.txt" and pastes the string into that file
Commands
Command
SETHOSTNAME
Examples
#*SUCCESS Hostname ABC is written into the file
or
#*FAILURE Hostname can not be set
set_IP_address
Set the static IP address of the eth0 network interface.
Commands
Command
set_IP_address <IP address>
Examples
Set the static IP address of the eth0 network interface to 198.168.0.15.
set_IP_address 198.168.0.15
Result:
#*IP address setting Successful
SETMAXSHUTDOWNTEMP
Sets maximum shutdown tempreture
Commands
Command
SETMAXSHUTDOWNTEMP
Examples
#*System Shutdown Temperature set to ...
or
#*System Shutdown Temperature should be between ... and ...
or
#*"Temperature Settings are not available!!!
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Creates the file (if does not exist) "/conf/
ip_tuner/hostname.txt" and pastes the string
into that file
Description
Set the static IP address of the eth0 network
interface.
Description
Sets maximum shutdown tempreture
RS232 commands
Values
string ABC(hostname)
Values
–
Values
integer n
83