Table of Contents
Advertisement
Examples
#*The RTC date is ...
GETSCHEDULEOP
Display the scheduler parameters.
Commands
Command
GETSCHEDULEOP
<preset>
Examples
Display the scheduler parameters for preset 1.
GETSCHEDULEOP 1
Result:
#*Scheduler: 1 - Active: 1 - Source: 12 - OFF Enabled: 1
ON: 31/07/2017 10:30:00 - OFF: 01/08/2017 03:30:00
DAYS: MON TUE WED THU FRI SAT SUN
GETSCHEDULER
Display the status of the scheduler.
Commands
Command
GETSCHEDULER
<preset>
Examples
Display the status of the scheduler.
GETSCHEDULER 1
Result:
#*The scheduler is ON
GETSERIALNO
Display the serial number of the display panel.
Commands
Command
GETSERIALNO
Examples
Display the serial number of the display panel.
GETSERIALNO
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Displays the scheduler parameters for the
specified preset.
Description
Displays the status of the scheduler for the
specified preset.
Description
Displays the serial number of the display
panel.
RS232 commands
Values
Preset = 1, 2, 3, or 4
Values
Preset = 1, 2, 3, or 4
Values
–
48
Advertisement
Table of Contents
