Setsource; Setstandbyled; Setstartchannel - Christie Access II Series Technical Reference

SETSOURCE

Enable and disable sources.
Commands
Command
SETSOURCE <source> <state>
Examples
Disable VGA.
SETSOURCE VGA 0
Result:
#*Selected source VGA
#*Enable/Disable state : b

SETSTANDBYLED

Set Standby led status
Commands
Command
SETSTANDBYLED
Examples
#*Standby Led is set to ON
or
#*Standby Led is set to OFF
or
#*Standby Led is not set (invalid input)

SETSTARTCHANNEL

Set startup channel which has been entered in Hotelmode.
Commands
Command
SETSTARTCHANNEL
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Enables and disables sources.
Description
Set Standby led status
Description
Set startup channel which has been entered in
Hotelmode.
RS232 commands
Values
Source:
• SCART1
• SCART2
• FAV
• SVHS
• HDMI1
• HDMI2
• HDMI3
• HDMI4
• YPBPR
• VGA
• SCART1S
• SCART2S
State:
• 0 = Disable
• 1 = Enable
Values
string n (n = ON, n = OFF)
Values
integer n
95