Examples
#*NoiseReduction is ...
GETNUMBEROFUSBSTORAGES
gets number of attached usb storages
Commands
Command
GETNUMBEROFUSBSTORAGES
Examples
#*number of attached usb storages is ... (numbers 0,1,2,...)
GETOFFSET
Get offset.
Commands
Command
GETOFFSET
Examples
#*offset is ...
GETOPSPOWER
Displays the current power state of the OPS.
Commands
Command
GETOPSPOWER
Examples
Display the power status of the OPS.
GETOPSPOWER
Result:
#*The OPS is not plugged in
or
#*The OPS is on
or
#*The OPS is off
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
gets number of attached usb storages
Description
Get offset.
Description
Displays the current power state of the OPS.
RS232 commands
Values
–
Values
–
Values
–
42