Setscheduleop; Setscheduler - Christie Access II Series Technical Reference

SETSCHEDULEOP

Set the schedule for the display panel.
Commands
Command
SETSCHEDULEOP <preset>_<onena-
bled>_<on_time>_<offenabled>_<off_time>_<-
day of the week>_<source>
Examples
Set the preset 4 to turn on at 6:30am and off at 11:30pm on Monday, Wednesday, and Friday, for VGA/PC.
SETSCHEDULEOP 4_1_06:30_1_23:30_0101010_VGA/PC
Result:
#*Schedule parameters are set
Set the preset 2 to turn on at 8:00am and off at 6:00pm on Monday to Friday, for USB.
SETSCHEDULEOP 2_1_08:00_1_18:00_0111110_USB
Result:
#*Schedule parameters are set

SETSCHEDULER

Enable and disable the scheduler.
Commands
Command
SETSCHEDULER<preset> <ON | OFF>
Examples
Enable the scheduler.
SETSCHEDULER 1 ON
Result:
#*The scheduler for preset 1 is set to ON
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set the schedule for the display panel.
Description
Enable and disable the scheduler for the
specified preset.
RS232 commands
Values
<Preset> = 1, 2, 3, or 4
<on-enabled> and <offenabled>:
• 0 = Disabled
• 1 = Enabled
<on_time> and <off_time> are
formatted as hh:mm.
<day of the week> = each digit
in the sequence is one day of the
week, starting with Sunday.
• 0 = Schedule does not
apply
• 1 = Schedule applies
<source>:
• LastSource
• USB
• DP
• OPS
• DVI
• HDMI
• YPBPR
• VGA/PC
Values
Preset = 1, 2, 3, or 4
92