Rs232 Commands; Adccal; Atof; Audiodesc - Christie Access II Series Technical Reference

RS232 commands

The UHD Display Panels commands can be used to modify product settings.
When using any terminal program other than PuTTy, you must include a carriage return (\r) and a line feed (\n) after all API commands.

ADCCAL

Start ADC auto calibration.
Commands
Command
ADCCAL
Examples
#*ADC Auto Calibration completed
R_Gain= ...
G_Gain= ...
B_Gain= ...
R_Offset= ...
G_Offset= ...
B_Offset= ...

ATOF

Auto panel Off Mode
Commands
Command
ATOF
Examples
#set auto Display off mode to ...

AUDIODESC

Set audio description state.
Commands
Command
AUDIODESC
Examples
#*set audio description state to n
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Start ADC auto calibration.
Description
Auto panel Off Mode
Description
Set audio description state.
Values
int n (0 = SCART-RGB, 1 = YPbPr, 2 = PC/VGA)
Values
int ( 0 <= mode <=8)
Values
integer n (0 = off, 1 = on)
11