Showbuildoptions; Showsignageid; Signagereset; Silentreset - Christie Access II Series Technical Reference

SHOWBUILDOPTIONS

Show build options.
Commands
Command
SHOWBUILDOPTIONS
Examples
#*...

SHOWSIGNAGEID

display signage ID on screen
Commands
Command
SHOWSIGNAGEID
Examples
#* Signage ID is 0 (1...99)

SIGNAGERESET

Set all items in the Signage Settings menu to the default values.
Commands
Command
SIGNAGERESET
Examples
Set all items in the Signage Settings menu to the default values.
SIGNAGERESET
Result:
#*All signage settings set to default values

SILENTRESET

Resets the device without coming up backlight.
Commands
Command
SILENTRESET
Examples
#*This command is available only Active Standby state!
or
#*Reset operation was not successful
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Show build options.
Description
display signage ID on screen
Description
Sets all items in the Signage Settings menu to
the default values.
Description
Resets the device without coming up backlight. –
RS232 commands
Values
–
Values
–
Values
–
Values
103