Setcontrast; Setcountry; Setcursorposition; Setcustomername - Christie Access II Series Technical Reference

SETCONTRAST

Set the picture contrast.
Commands
Command
SETCONTRAST
<value>
Examples
Set the picture contrast to 25.
SETCONTRAST 25
Result:
#*Picture contrast value is set to 25

SETCOUNTRY

Change the country setting.
Commands
Command
SETCOUNTRY
<country>
Examples
Change the country to Germany.
SETCOUNTRY Germany
Result:
#* setCountry() set to Germany

SETCURSORPOSITION

Sets cursor position in the browser.
Commands
Command
SETCURSORPOSITION
Examples
#*X: a Y: b

SETCUSTOMERNAME

Change or set the Customer name
Commands
Command
SETCUSTOMERNAME
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Sets the picture contrast.
Description
Set the country.
Description
Sets cursor position in the browser.
Description
Change or set the Customer name
RS232 commands
Values
0 to 100
Values
–
Values
string-integer a,b
Values
string - (customername)
77