Setnoisereduction; Setoffset; Setopsalwayson; Setopspower - Christie Access II Series Technical Reference

SETNOISEREDUCTION

Set noise reduction.
Commands
Command
SETNOISEREDUCTION
Examples
#*NoiseReduction set to n
or
#*Missing noise reduction state

SETOFFSET

Set offset.
Commands
Command
SETOFFSET
Examples
#*set offset to n

SETOPSALWAYSON

Set OPS Always on value
Commands
Command
SETOPSALWAYSON
Examples
#*invalid value entered
#*OPS Always on set as true
#*OPS Always on set as false

SETOPSPOWER

Turn the OPS power on and off.
Commands
Command
SETOPSPOWER
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set noise reduction.
Description
Set offset.
Description
Set OPS Always on value
Description
Turns the OPS power on and off.
RS232 commands
Values
str-int n (n = OFF, n = LOW, n = MEDIUM, n =
HIGH)
Values
integer n (0 ≤ n ≤ 100). n is the number of
pixels which will be cropped from all four sides.
Values
string parameter "true" or "false"
Values
• on
• off
87