Setavl; Setbacklight; Setbacklightlevel - Christie Access II Series Technical Reference

Examples
#*Auto launch mode is set to *****
or
#*Auto launch mode is not set (invalid input)

SETAVL

Turn AVL on and off.
Commands
Command
SETAVL <value>
Examples
Turn off AVL.
SETAVL 0
Result:
#*set avl state to 0

SETBACKLIGHT

Set backlight pin status.
Commands
Command
SETBACKLIGHT
Examples
#*setBacklight port to ON
or
#*setBacklight port to OFF

SETBACKLIGHTLEVEL

Set backlight level.
Commands
Command
SETBACKLIGHTLEVEL
Examples
#*Backlight level set to n
or
#*NACK
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Turns AVL on or off.
Description
Set backlight pin status.
Description
Set backlight level.
RS232 commands
Values
0 = Off
1 = On
Values
str-int n (n = ON, n = OFF)
Values
int n (0 ≤ n ≤ 100)
72