Set3Dmode; Set4Kbrowser; Setallvideowall; Setautolaunch - Christie Access II Series Technical Reference

SET3DMODE

Set 3D mode values (values are off, auto, side by side, top bottom and game)
Commands
Command
SET3DMODE
Examples
#*set3DMode() set to n
or
#*Incorrect 3d mode parameter entered

SET4KBROWSER

force browser resolution as 4K
Commands
Command
SET4KBROWSER
Examples
#*Forced 4K browser is enabled
OR
#*Forced 4K browser is disabled

SETALLVIDEOWALL

Set all videowall parameters
Commands
Command
SETALLVIDEOWALL
Examples
#*... ("set to" for each parameter in order)

SETAUTOLAUNCH

Set the auto launch value
Commands
Command
SETAUTOLAUNCH
Access II Series LCD Panels Technical Reference-External Controls
020-001853-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Set 3D mode values (values are off, auto, side
by side, top bottom and game)
Description
force browser resolution as 4K
Description
Set all videowall parameters
Description
Set the auto launch value
RS232 commands
Values
int n (n = off, auto, side by side, top bottom,
game)
Values
string n (ON, OFF (or any other string) for
default state)
Values
parameters for items in following format:
picture_mode-contrast-brightness-sharpness-
color-powesave_mode-backlight_mode-
colortemp-zoom_mode-hdmi_trueblack-
picture_hue-volume-headphone_volume
Values
string (cms, openbrowser, disabled, vsignlite
(vsignlite only MB135VS))
71