Gate Screen - Yamaha TF5 User Manual

GATE screen

Displayed when you tap the GATE button in the TOOLBAR area.
Allows you to configure the noise gate for each channel. When the input signal level is lower than a specified amount (threshold),
the output signal is reduced by a specified amount (range). GATE is available for CH 1–32.
1
GATE button
Turns the gate on and off.
2
Gate input level meter
Displays the gate's input level.
3
Threshold slider
Determines the level at which the gate is applied.
4
Gate graph
Displays a visual representation of the gate level.
5
Range slider
Determines the amount by which the signal will be lowered when the gate is applied.
6
Attack slider
When the input signal exceeds the threshold, this setting determines how quickly the gate opens.
7
Hold slider
When the input signal drops below the threshold, this setting determines how much time passes before the gate closes.
8
Decay slider
After the hold time passes, this setting determines how quickly the gate closes.
The value here is expressed as the time required for the level to change by 6dB.
9
GR (gain reduction) meter
Displays the amount by which the signal's gain is reduced.
0
OUT (gate output) meter
Displays the gate's output level.
GATE screen menu
The following items are available in the GATE screen's context menu.
Copy: Copies the GATE parameters of the selected channel to the clipboard.
Paste: Pastes the GATE parameters in the clipboard to the selected channel.
Compare: Allows you to compare the GATE parameters of the selected channel with the GATE parameters in the clipboard by
switching between the two.
Default: Resets GATE settings to their default values.
- 23 -
Screen areas
TF StageMix
User's Guide