Download Print this page

Kubota RTV 900 Installation & Operation Manual

Hide thumbs Also See for RTV 900:

Advertisement

Quick Links

Installation & Operations Manual
2010 Kubota RTV 900 Soft Top & Rear Panel
How to use this manual:
• Be sure to read through the entire manual carefully before beginning installation.
• Read all warnings and precautions carefully and follow safety procedures
• Each Seizmik product has a "difficulty-to-install" rating based on the following:
•Easy – uses basic hand tools and does not require any modifications to the existing structure of your vehicle. Most Seizmik
products fall into this category. Hey, why be difficult?
•Skilled – requires a little more skill to install properly. May require modifications to the vehicle (drilling, electrical, etc. as well as
the use of power tools.
•Difficult – May require welding or extensive mechanical work for proper installation. Hardly any Seizmik products fall into this
category but we had to say it.
• Watch for the following symbols:
Installation information:
• This product has an installation rating of: Easy
• Approximate installation time: 5 Minutes
• This product is easiest to install with: 1 Person
CAUTION – Indicates an installation or operational step or procedure that if not followed could result
in damage to the product or you. Use caution when you see this symbol and follow all instructions.
TIP – Indicates an installation or operation tip. These tips can help you avoid installation problems,
ensure safe and easy operation, and make sure everything goes smoothly.
WARNING – Indicates an installation or operational procedure that must be observed to prevent
serious injury or death.
Seizmik makes Windshields, Doors,
Tops, Hood Racks, Brush Guards, and
other great accessories for utility
vehicles & side x sides. Our products
are engineered tough for long life
and tested under the harshest of
conditions. Always observe the
warnings and precautions in this
manual when using your Seizmik
products. For best results, carefully
follow the instructions in this manual
and make no modifications.
Seizmik products are designed,
developed and manufactured by
Vialink Corp. If you have any
questions, comments, need
assistance, or are missing parts, please
call 1-866-838-3366 ext.110 between
9:00AM and 5:00PM EST. You can
email us at support@seizmik.com.
Trailering Info:
ONLY trailer with rear window open and top fully an properly secured.
MAX SPEED – 55 MPH
Part# 18046
Textile Panel: 54-SW-90601
Tension Strap: 54-SW-90602

Advertisement

loading

Summary of Contents for Kubota RTV 900

  • Page 1 Part# 18046 Textile Panel: 54-SW-90601 Tension Strap: 54-SW-90602 Installation & Operations Manual 2010 Kubota RTV 900 Soft Top & Rear Panel Seizmik makes Windshields, Doors, Tops, Hood Racks, Brush Guards, and other great accessories for utility vehicles & side x sides. Our products...
  • Page 2 RTV 900 Soft Top Installation (continued) If you currently have a Seizmik windshield, remove the top (2) black plastic windshield clamps. Fasten the (3) tension straps on the top of the ROPS as shown. These straps prevent the roof from sagging Tip –...
  • Page 3 RTV 900 Soft Top Installation (continued) Locate the strap on the driver side at the front cross bar of the ROPS. Fasten around the bar. Repeat this step for the passenger side of the top. Locate the straps running down the length of the rear vertical ROPS bar.
  • Page 4 RTV 900 Soft Top Installation (continued) Locate the strap on the driver side at rear of the cab. Fasten around the bar as shown below. Locate the strap on the passenger side with the adhesive velcro strip. Clean the plastic panel on the vehicle with alcohol, remove the strip and secure to plastic panel as shown.