Machine Troubleshooting - Kubota RTV-X900 Operator's Manual

MACHINE TROUBLESHOOTING

Trouble
Machine operation is not
smooth.
Machine does not move while
engine is running.
Brakes not working correctly
Brake noise
HST oil overheats
If you have any questions, consult your local KUBOTA Dealer.
Cause
A Hydrostatic transmission fluid is
insufficient.
A Filter is clogged.
A Parking brake is on.
A Transmission fluid level is
insufficient.
A Brake fluid level is low.
A Air is in brake system.
A Brake pads are worn.
---
A HST overloaded.
A Low oil level.
A Dirty oil cooler core or screens.
A Oil flow route corroded.
A Hydraulic lever is positioned at the
end of stroke.
TROUBLESHOOTING
Countermeasure
A Replenish oil.
A Replace the filter.
A Release the parking brake.
A Replenish oil.
A Check fluid level.
A Consult your KUBOTA Dealer.
A Consult your KUBOTA Dealer.
A Consult your KUBOTA Dealer.
A Reduce load.
A Fill oil to the correct level.
A Remove all trash.
A Check oil cooling system.
A Set the lever to the "NEUTRAL" ("OFF")
position.
89