Adjusting The Mattress Tray - Dräger Babyleo TN500 Instructions For Use Manual

CAUTION
Risk of injury due to collision when using height adjustment
The radiant warmer or accessories may collide with obstacles when the device
height is raised. The patient may be injured by the jolting. The radiant warmer and
the accessories may be damaged.
► Make sure there is sufficient space above the radiant warmer and the installed
accessories.
► Stop the device promptly ahead of any possible obstacle.
Procedure:
1 Adjust the device height using the foot pedals:
– The right-hand foot pedal (1) moves the device up.
– The left-hand foot pedal (2) moves the device down.
Fig. 21
✓ The device height is set.
4.3

Adjusting the mattress tray

The height and tilt of the mattress tray can be adjusted by means of the buttons on
the mattress tray control panel.
Prerequisites:
– The device is in operation.
– The bed-tilt mechanism is not locked.
WARNING
Risk of injury when adjusting the mattress tray
If the mattress tray is adjusted without due care, parts of the body may become
trapped. If an external ventilator is being used, the patient may be accidentally
extubated.
► When lowering or tilting the mattress tray, make sure that no part of the patient's
body or user's body is within the hazard areas.
► The height adjustment and bed-tilt mechanism must only be operated by a
single user.
► If the mattress tray is pulled out, operate the device height adjustment with
caution and stop it promptly ahead of an obstacle.
► Ensure that hoses of a sufficient length are used when using an external
ventilator.
Instructions for use Babyleo TN500 SW 1.0n
2
Foot pedals
1
Operating concept
49