Dräger Babyleo TN500 Instructions For Use Manual page 103

6.13.3 Setting the mattress core temperature
The mattress core temperature can be set manually or automatically.
Prerequisite:
– The heated mattress is connected to the device.
Procedure:
1 Touch the Mattress therapy control (1) in the therapy bar.
 The therapy control turns yellow.
Fig. 55
2 Adjust the mattress core temperature manually using the rotary knob.
or
3 Turn the rotary knob to the right as far as it will go and set the Auto function.
 The device sets the mattress core temperature automatically according to the
4 Press the rotary knob to confirm.
 The therapy control turns dark green.
✓ The mattress core temperature is set.
Instructions for use Babyleo TN500 SW 1.0n
1
Therapy control for the heated mattress
air temperature.
Operation
103