Dräger Babyleo TN500 Instructions For Use Manual page 89

Procedure:
1 Set and confirm the upper and lower alarm limit for the central skin temperature.
2 Set and confirm the upper and lower alarm limit for the peripheral skin
temperature.
3 Set and confirm the upper and lower alarm limit for the difference between the
central and the peripheral skin temperature.
✓ The alarm limits for skin temperature monitoring are set.
6.9.5 Automatic setting of the skin temperature alarm limits
The skin temperature alarm limits can be set automatically on the basis of the
current skin temperature measurement.
Prerequisites:
– The 2 skin temperature sensors are connected to the device and attached to the
patient.
– The Advanced skin temperature monitoring function is activated.
Procedure:
1 Touch the Autoset all limits button (1).
Fig. 47
2 Press the rotary knob to confirm.
 The following alarm limits are set automatically for the current skin
Current skin temperature measure-
ment
Central skin temperature
Peripheral skin temperature
Difference
The automatic alarm limits relate in each case to the current skin temperature
measurement or to the current difference.
Instructions for use Babyleo TN500 SW 1.0n
Current skin temperature measurement
temperature measurement (2):
2
1
Automatic alarm limits
Upper alarm limit: + 1 °C (1.8 °F)
Lower alarm limit: -1 °C (1.8 °F)
Upper alarm limit: +1 °C (1.8 °F)
Lower alarm limit: -1 °C (1.8 °F)
Upper alarm limit: +0.5 °C (0.9 °F)
Lower alarm limit: -0.5 °C (0.9 °F)
Operation
89