Dräger Babyleo TN500 Instructions For Use Manual page 148

Configuration
Vertical tab Heading or parame-
ter
Interfaces
COM
Protocol
Baud rate
USB
USB port
Units
Temperature
Weight (option)
Light (option)
Alarm volume
Start level for alarm
volume [%]
Maximum alarm
volume [%]
148
Description
Enter and confirm the configu-
ration password.
Set the following parameters:
– MEDIBUS.X
– None
– Baud rate
Switch the USB port on or off. On
Enter and confirm the configu-
ration password.
Specify the unit ºC or ºF.
Specify the unit g or lbs oz.
Specify the unit lux or fc.
Enter and confirm the configu-
ration password.
Set the start level for the alarm
volume as a percentage.
Set the maximum alarm vol-
ume as a percentage.
Instructions for use Babyleo TN500 SW 1.0n
Factory setting
MEDIBUS.X
9600
ºC
g
lux
50 %
70 %