Dräger Babyleo TN500 Instructions For Use Manual page 132

Configuration
3 Enter and confirm the following data using the keyboard:
– First name
– Last name
– Identification number
 The name or identification number is displayed in the header bar.
4 For the following data, touch the button, turn the rotary knob to the right or left,
and confirm each input:
– Date of birth
– Gestational age [wk + d]
– Birth weight [g]
5 Touch a button for the gender.
 The gender is displayed in the header bar and in the Family screen view.
6
 The symbol is displayed in the header bar and in the Family screen view.
8.1.1 Deleting patient data
This chapter describes how to delete patient data.
Patient data can only be deleted by restarting the device.
1 Switch off the device on the display unit using the Start/standby key .
 The Shut down dialog window is displayed.
2 Touch the Shut down button.
 The device shuts down.
3 Switch on the device on the display unit using the Start/standby key .
 The start-up screen is displayed.
4 Touch the New patient button.
 The existing patient data is deleted.
 The therapy settings and the patient-specific alarm settings are reset to the
 The logbook is not deleted.
✓ Patient data can be entered anew.
132
Either the patient name or identification number can be displayed in the
header bar. If an identification number has been entered, the header bar
always displays the identification number. In the System setup dialog
window, it is possible to specify that neither the patient name nor the
identification number is displayed in the header bar: System setup... >
Screen layout > More settings
Select a symbol for the patient in the list field.
user-specific settings.
Instructions for use Babyleo TN500 SW 1.0n