Dräger Babyleo TN500 Instructions For Use Manual page 72

Operation
The patient's thermal equilibrium may be influenced by the ambient conditions, e.g.,
by drafts.
In radiant warmer operation Dräger recommends setting the highest position for
the mattress tray. This position provides the most effective warming for the
patient. This position also offers good access to the patient.
6.6.2 Modes in radiant warmer operation
To regulate the temperature, the following modes are available in radiant warmer
operation:
– Skin temperature mode
– Manual mode
– Kangaroo mode
As soon as the patient is placed in the device, switch to manual mode or skin
temperature mode.
Dräger recommends using skin temperature mode in radiant warmer operation as
the radiation intensity is adjusted automatically in this mode according to the
measured central skin temperature.
6.6.3 Settings in radiant warmer operation
The following settings can be made in radiant warmer operation:
– Skin temperature (skin temperature mode), radiant warmer power (manual
mode)
– Mattress core temperature
For further information, see the following chapter: ''Skin temperature
mode'' (page 77)
For further information, see the following chapter: ''Manual mode'' (page 91)
For further information, see the following chapter: ''Heated mattress
(option)'' (page 100)
For further information, see the following chapter: ''Kangaroo mode'' (page 104)
6.6.4 Pre-warm mode
If the following prerequisites are met, the device is automatically operated in pre-
warm mode:
– The device has been switched off for longer than 2 hours.
– The device is switched on with the hood open.
In pre-warm mode the radiant warmer power is set automatically and comprises the
following 3 phases:
No.
1
2
3
72
Radiant warmer power
100 %
60 %
30 %
Duration
3 minutes
11 minutes and 30 seconds
Until the user sets a value.
Instructions for use Babyleo TN500 SW 1.0n
Display
Pre
Pre
30