Dräger Babyleo TN500 Instructions For Use Manual page 193

14.6 Data exchange and interfaces (continued)
Data bits
Parity
Stop bits
Pin assignment
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 7, 8
Pin 9
Housing
USB port
Type
Supported devices
Service port
Type
Transfer speed
Audio port
Type
Instructions for use Babyleo TN500 SW 1.0n
8
Even
1
n/c
RXD
TXD
Pins 4 and 6 are connected internally
SHLD-GND
Pins 7 and 8 are connected internally
n/c
SHLD-GND
Only connect passive storage media, i.e.
devices that do not have a separate power sup-
ply.
USB type A socket; USB 1.1
USB mass storage device from list of accesso-
ries formatted with FAT16 or FAT32
Only for DrägerService
Only connect devices that fulfill the require-
ments of the standard IEC 60950-1 on
unearthed SELV circuits or the requirements of
the standard IEC 60601-1 on accessible sec-
ondary circuits with max. 60 V DC nominal volt-
age.
RJ45 connector
10Base-T, IEEE 802.3 Clause 14.
Requires at least a CAT3 cable.
Only connect devices that fulfill the require-
ments of the standard IEC 60950-1 on
unearthed SELV circuits or the requirements of
the standard IEC 60601-1 on accessible sec-
ondary circuits with max. 60 V DC nominal volt-
age.
3.5 mm (0.14 in) jack plug
Technical data
193