Drum Heater Relay Board (PL5.0.17)
Phaser 8400/8500/8550/8560 Color Printer Service Manual
Warning
This board is supplied with 120 VAC, shut off printer power and
disconnect the power cord before starting this procedure.
1.
Remove the Right Side Cover (page 8-5).
2.
Disconnect all connections to the board.
3.
Remove 2 screws securing the board to the chassis.
4.
Remove the Drum Heater Relay Board.
Drum Heater
Relay Board
Replacement Note
Ensure that no wires are routed behind the Drum Heater Relay Board
during reinstallation. Install and torque the 2 screws to 12 in. lbs.
Reconnect all connections.
Service Parts Disassembly
s8500-113
8-49