Preheater Lift Solenoid (Pl4.0.1) - Xerox PHASER 8500 Service Manual

Xerox printer user manual

Hide thumbs Also See for PHASER 8500:

Table of Contents

Service Parts Disassembly

Preheater Lift Solenoid (PL4.0.1)

Open the Front Door.

Remove the Control Panel and cover (page 8-5).

Remove 4 screws, disconnect 2 connectors, and remove the Exit Module

(page 8-32).

Remove the Outer and Upper Duplex Guides (page 8-34). The Preheater

Lift Solenoid is now visible on the top of the Transfix Load Module.

Disconnect the solenoid harness.

Remove 1 screw holding the solenoid to the Transfix Load Module.

Replacement Note

Align the hole on Transfix Load Module. Install and torque the screw

to 15 in. lbs. Reconnect the harness.

Phaser 8400/8500/8550/8560 Color Printer Service Manual