Xerox PHASER 8500 Service Manual page 133

Phaser 8400/8500/8550/8560 Color Printer Service Manual
Menu Item
Reset NVRAM
Power Saver Timeout
Reset Printer
Head Adjust
Adjust X-Axis scale
Drift Compensation
Head-to-Drum Adjust
Wiper adjust (8500)
Purge adjust (8500)
Reset Ink Loader (8500)
Service Usage Profile
Print OCR Usage Profile
Engine Copy Count
Head Serial Number
Head Cal Date
Head Version
Engine Firmware Version
2-Sided Printing Oil Chase
Envelope Oil Chase
Center Image (8400)
Exit
Description
Provides access to reset the printer back to its
factory-default settings and erase all network
settings. If possible, print the Configuration Page
before resetting NVRAM.
Selects the Power Saver Timeout, the amount of
time the printer must be idle before changing to
Power Saver low-energy consumption mode, per
ENERGY STAR\256 guidelines.
Resets all items in the Printer Controls menu to
their default values.
This is for manufacturing or engineering use only.
This is for manufacturing or engineering use only.
This is for manufacturing or engineering use only.
This is for manufacturing or engineering use only.
Adjusts the tension on the wiper blade (for
engineering use only).
When replacing a purge pump different than the
manufactured pump, you may need to adjust the
amount of pressure in the pump using this menu
item.
Resets the ink loader ink stick count.
Prints pages with detailed printer-usage
information.
Prints using a font optimized for FAX.
Displays engine copy count.
Displays the printhead serial number.
Displays the date the printhead was calibrated.
Displays the printhead version.
Displays the engine firmware version.
Enables a chase page to follow a 2-sided printing
job.
Enables a chase page to follow an envelope print
job.
Centers the image by adjusting the margin (not
operational).
Exits the Hidden Service Diagnostics Menu and
returns to the previous menu.
General Troubleshooting
4-3