Stripper Carriage (Pl2.0.12) And Transfix Roller (Pl2.0.13) - Xerox PHASER 8500 Service Manual
Xerox printer user manual
Hide thumbs
Also See for PHASER 8500:
- User manual (151 pages) ,
- Voluntary product accessibility template (9 pages) ,
- Quick reference manual (9 pages)
Table of Contents
Advertisement
Stripper Carriage (PL2.0.12) and Transfix Roller (PL2.0.13)
Phaser 8400/8500/8550/8560 Color Printer Service Manual
Caution
Hold the Transfix Roller and Stripper Carriage with one hand during
removal of the Transfix Roller shaft to prevent the Transfix Roller from
falling and damaging the printer. Also, do not use the Transfix Roller Shaft
Restraint as a lever to pry the shaft. Doing so can bend the restraint.
1.
Remove the Right Side Cover (page 8-5).
2.
Disconnect P/J250 from the I/O Board.
3.
Remove the Control Panel Cover (page 8-5).
4.
Remove 2 screws securing the I/O Board to the chassis, slide the board
towards the rear, and move the board out of the way.
5.
Loosen 1 screw securing the Transfix Roller Shaft Restraint and remove
the restraint.
6.
Use the end of the Transfix Roller shaft restraint to remove the shaft.
7.
Remove the Stripper Carriage and Transfix Roller.
Service Parts Disassembly
s8500-083
8-19
Advertisement
Table of Contents
Troubleshooting
