Functional Specifications; Electrical Specifications; Environmental Specifications - Xerox PHASER 8500 Service Manual

General Information

Functional Specifications

Electrical Specifications

Environmental Specifications

1-12
Characteristic Specification
Printing Process Solid-ink
Color Medium
Yellow, cyan, magenta, and black ink sticks, each shape-
coded. The printer uses the subtractive color system to
produce the colors red, green, and blue.
Operating Modes and (8400)
Resolutions Fast Color (300x300 dpi), Standard (300x450 dpi), Enhanced
(563x400 dpi), High Resolution/Photo (525x2400)
(8500/8550/8560)
Fast Color (225x400 dpi), Standard (300x450 dpi), Enhanced
(525x400 dpi), High Resolution/Photo (525x2400)
Maximum Operating 24 ppm (8400 and 8500 series)
Printing Speed 30 ppm (8550 series)
First-Print-Out As low as 6 seconds
(Letter/A4)
Warm-Up Time:
From Off (cold start) 12 minutes (8400), 15 minutes (8500/8550/8560)
From Power Saver 4 minutes
Characteristic Specification
115 Volt
Primary line voltages 90 - 140 VAC
Primary line voltage 47 - 63 Hz
frequency range
Power consumption 1250 W (peak) - 1000 typical
180 W (idle)
230 W (average during
printing)
Energy Star® 43 W
Nominal Operating Environment
Temperature 10º - 32º C (50º - 90º F) operating
20º - 25º C (68º - 77º F) Best jam performance
Humidity 10% - 80% RH Non-Condensing operating
Phaser 8400/8500/8550/8560 Color Printer Service Manual
230 Volt
180 - 264 VAC
47 - 63 Hz
1250 W (peak) 1000 typical
180 W (idle)
230 W (average during
printing)
43 W